Stanford DS360 Function Generator

200 kHz Ultra Low Distortion (Distributed only in Germany.)

Specifications

Frequency
Range 10 mHz to 200 kHz
Resolution 6 digits
Accuracy 25 ppm (0.0025 %)
Amplitude
Unbalanced outputs
50 Ω load 5.0 µVpp - 14.4 Vpp
600 Ω load 5.0 µVpp - 20.0 Vpp
Hi-Z load 10.0 µVpp - 40.0 Vpp
Balanced outputs
50 Ω load 10.0 µVpp - 28.8 Vpp
150 Ω load 10.0 µVpp - 28.8 Vpp
600 Ω load 10.0 µVpp - 40.0 Vpp
Hi-Z load 20.0 µVpp - 80.0 Vpp
Resolution 0.01 dB or 1 mV, whichever is greater
Accuracy ± 0.1 dB (1.0%)
Offset ± amplitude range
Distortion and Noise
THD
Unbalanced outputs -100 dB to 20 kHz, -85 dB to 100 kHz
Balanced outputs -97 dB to 20 kHz, -85 dB to 100 kHz
Broadband noise <100 nV/ÖHz (1 Vrms, 1 kHz)
Outputs
Configuration Balanced and unbalanced
Connectors Floating BNCs, banana connectors, and XLR jack
Source impedance
Balanced 50 Ω, 150 Ω, and 600 Ω
Unbalanced 25 Ω, 50 Ω, and 600 Ω
Max. float voltage ± 40 VDC
Waveforms
Sine 0.010 Hz to 200 kHz
Square 0.010 Hz to 200 kHz, 700 ns rise time
Noise White, pink, and bandlimited white
Two-Tone Combination of two sine waves, or sine and square wave. Frequency and amplitude are independently set for each wave.
Burst
ON cycles 0.5 or 1 to 65534 cycles
Repetition rate 1 to 65534 cycles
Triggering Internally triggered, externally triggered, or externally gated
Sweeps
Type Linear or logarithmic
Range 10 Hz to 200 kHz
Rate 0.01 kHz to 3.1 kHz
Flatness ±0.1 dB (1.0%)
Other Outputs
Sync TTL square wave (same frequency as output)
Trigger out Internal burst trigger
Trigger/Gate in TTL pulse starts sweep or externally triggered burst. TTL high level activates externally gated burst.
Sweep TTL pulse marks start of sweep
Accuracy
1% ±25 mV (Vp + offset >0.63 V)
1% ±2.5 mV (63 V > Vp +offset > 0.063 V)
1% ± 250 µV (6.3 mV > Vp +offset > 63 mV)
1% ± 25 µV (Vp + offset <6.3 mV)
General
Computer interfaces GPIB and RS-232. All instrument functions can be controlled.
Size 17 "W x 3.5 "H x 16.25 "D
Weight 17 lbs
Power 50 W, 100/120/220/240 VAC 50/60 Hz
Warranty One year parts and labor on any defects in material or workmanship.