R&S®RTM Digital Oscilloscopes
Scope of the Art
Specifications
| Vertical system | ||
|---|---|---|
| Input channels | 2 | |
| 4 | ||
| Bandwidth (–3 dB) at 50 Ω | 500 MHz | |
| Rise time (calculated) | 700 ps | |
| Input impedance | 50 Ω ±1.5 % 1 MΩ ±1 % with 15 pF (meas) |
|
| Input sensitivity | max. bandwidth in all ranges | 50 Ω: 1 mV/div to 1 V/div 1MΩ: 1 mV/div to 10 V/div |
| Resolution | 8 bit | |
| Acquisition system | ||
| Max. sampling rate (realtime) | 2.5 Gsample/s; 5 Gsample/s interleaved | |
| Memory depth | 4 Msample; 8 Msample interleaved | |
| Decimation modes | combination of decimation mode and waveform arithmetics possible | Sample, Peak Detect, High Resolution |
| Waveform arithmetics | Off, Envelope, Average, Smooth | |
| Interpolation modes | Sin(x)/x | |
| Horizontal system | ||
| Time base range | 1 ns/div to 50 s/div | |
| Time base accuracy | 10 ppm | |
| Channel deskew | ±100 ns | |
| Trigger system | ||
| Trigger types | Edge, Width, Video, Pattern, B-Trigger optional: I2C, SPI, UART/RS-232 |
|
| Trigger level | ± 10 div from center of screen | |
| Analysis and measurement functions | ||
| QuickMeas | at the push of a button, measurement values available internally are written directly onto the waveform and updated continuously | peak-to-peak voltage, pos. peak, neg. peak, rise time, fall time, mean value, RMS value, period, frequency |
| Automatic measurements | level, peak-to-peak voltage, pos. peak, neg. peak, period, frequency, number of pulses, number of neg. pulses, number of rising edges, number of falling edges, pulse width, inverted pulse width, duty cycle, neg. duty cycle, rise time, fall time, trigger period, trigger frequency | |
| Cursor measurements | voltage, time, ratio X, ratio Y, number of pulses, peak value, RMS value, mean value, rise time, fall time, vertical marker | |
| Waveforms maths | addition, subtraction, multiplication, division, maximum, minimum, square, square root, magnitude, positive wave, negative wave, reciprocal, inverse, integral, differentiation, log10, ln, lowpass filter, highpass filter, FFT | |
| General data | ||
| Dimensions | W x H x D | 380 mm x 175 mm x 110 mm (14.96 in x 6.89 in x 4.33 in) |
| Weight | 4.9 kg (10.8 lb) | |
| Display | 8.4" TFT colordisplay, (1024 x 768 pixels) |
|
| Connectivity | 2 x USB host, USB device, LAN, GPIB (optional), DVI-D for external monitor | |
