EMC & Field Strength Test Solutions

EMC and EMI test equipment and systems from Rohde & Schwarz determine the causes and effects of electromagnetic interference. Decades of experience in the field of EMC measurements has made us the world's market leader.

Disturbance Voltage Measurements
		Frequency	Use E	Use H	Use V	Use I	Use P
	R&S^®ENV216 Two-Line V-Network For disturbance voltage measurements on single-phase EUTs	9 kHz - 30 MHz			X
	R&S^®ESH2-Z5 V-Network, 4 lines, 25 A for RFI voltage measurements on three-phase EUTs	9 kHz - 30 MHz			X
	R&S^®ENV4200 V-Network, 4 lines, 200 A for RFI voltage measurements at high currents	150 kHz - 30 MHz			X
	R&S^®ESH3-Z6 Single-Line V-Network, 150 A 100 kHz to 200 MHz	100 kHz - 200 MHz			X
	R&S^®EZ-4 Control Cable, 3 m, ESIBx, ESPIx–ESH3-Z5				X
	R&S^®EZ-5 Control Cable, 10 m, ESIBx, ESPIx–ESH2-Z5				X
	R&S^®EZ-6 Control Cable, 10 m, ESIBx, ESPIx–ESH3-Z5				X
	R&S^®EZ-13 Control Cable, 2 m, ESxS–ESH2-Z5				X
	R&S^®EZ-14 Control Cable, 2 m, ESxS–ESH3-Z5				X
	R&S^®EZ-21 Control Cable, 3 m/10 m ENVxxx to ESIB, ESPI, ESCI, ESU,ESL				X
	R&S^®EZ-27 Adapter for LISN control cable Required to connect R&S^®EZ-21 and R&S^®ESL				X
	R&S^®ENY21 Coupling Network For radio disturbance and immunity measurements on unshielded, symmetrical telecommunications ports	150 kHz - 30 MHz			X
	R&S^®ENY41 Coupling Network For radio disturbance and immunity measurements on unshielded, symmetrical telecommunications ports	150 kHz - 30 MHz			X
	R&S^®ENY81 Coupling Network For radio disturbance measurements on unshielded, symmetrical telecommunications ports	150 kHz - 30 MHz			X
	R&S^®ENY81-CA6 Coupling Network For radio disturbance and immunity measurements on telecommunications ports				X
	R&S^®ESH2-Z2 Active Voltage Probe The active voltage probe is used for measuring RFI voltages on lines that do not carry AC supply voltage.	9 kHz - 30 MHz			X
	R&S^®ESH2-Z3 Passive Voltage Probe The passive voltage probe is suitable for measuring RFI voltages (on AC supply lines) to CISPR16-2-1 and EN55016-2-1.	9 kHz - 30 MHz			X
	R&S^®ESH2-Z31 Attenuator for ESH2-Z3 For checking the interference source impedance to EN55016-2-1 and CISPR16-2-1	9 kHz - 30 MHz
	R&S^®ESH3-Z2 Pulse Limiter High RF input levels and high-energy interfering pulses generated on artificial mains networks when the DUT is switched on and off can damage the RF input circuits of test receivers. The R&S^®ESH3-Z2 pulse limiter limits and reduces the interference level.	0 Hz - 30 MHz			X
	R&S^®EZ-12 Antenna Impedance Converter for interference measurements on vehicle antennas to CISPR25	150 kHz - 30 MHz			X
	R&S^®EZ-25 150 kHz Highpass Filter For conducted emission measurements in the presence of high longwave mains disturbance signals	150 kHz - 30 MHz			X
Disturbance Current Measurements
		Frequency	Use E	Use H	Use V	Use I	Use P
	R&S^®EZ-17 Current Probe Electromagnetic emission and susceptibility measurements in the range 5 Hz to 100 (200) MHz	20 Hz - 100 MHz				X
	R&S^®ESV-Z1 VHF Current Probe R&S^®ESV-Z1 current probe is used for selective or broadband measurement of very small as well as of very large RF currents in electric lines. They are shielded against electrostatic effects and comply with CISPR16-1-2 and VDE0876.	9 kHz - 600 MHz				X
Disturbance Power Measurements
		Frequency	Use E	Use H	Use V	Use I	Use P
	R&S^®MDS-21 Absorbing Clamp Measurement of disturbance power and screening effectiveness on cables	30 MHz - 1000 MHz					X
	R&S^®EZ-24 Ferrite Clamp Reproducible measurements of disturbance field strength and disturbance power	1000 kHz - 1000 MHz					X
Field-strength Measurements
		Frequency	Use E	Use H	Use V	Use I	Use P
	R&S^®HZ-11 E and H Near-field probe Set Probe Set HZ-11 for E and H near-field measurements	100 kHz - 2 GHz	X	X
	R&S^®HZ-14 Probe Set for E and H near-field measurements Detecting EMC trouble spots	9 kHz - 1000 MHz	X	X
	R&S^®HZ-15 Probe Set for E and H near-field emission measurements with test receivers and spectrum analyzers	30 MHz - 3 GHz	X	X
	R&S^®HZ-10 Shielded, calibrated Pickup Coil (MIL) Measurement of magnetic field strengths to military standards	5 Hz - 10 MHz		X
	R&S^®HFH2-Z4 Inductive Probe Inductive probe for the assessment of the magnetic fieldstrength	100 kHz - 30 MHz		X
	R&S^®HFH2-Z1 Rod Antenna Broadband active rod antenna for use as a general-purpose receiving antenna and for measuring the electrical fieldstrength, preferably in open-area measurements.	9 kHz - 30 MHz	X
	R&S^®HFH2-Z2 Loop Antenna Broadband active loop antenna for measuring the magnetic field-strength	9 kHz - 30 MHz		X
	R&S^®HFH2-Z6 Rod Antenna (MIL) Broadband active rod antenna for measuring the electrical component of radiated EMI in test setups to MIL-STD-461/462 and similar MIL standards and CISPR25.	9 kHz - 30 MHz	X
	R&S^®HL033 Antenna Log-Periodic Antenna	80 MHz - 2 GHz	X
	R&S^®HL223 Antenna Log-Periodic Antenna	200 MHz - 1.3 GHz	X
	R&S^®HL040 Antenna Log-Periodic Dipole Antenna	400 MHz - 3.6 GHz	X
	R&S^®HL050 Antenna Log-Periodic Antenna	850 MHz - 26.5 GHz	X
	R&S^®HM020 Antenna Triple-Loop Antenna	9 kHz - 30 MHz		X
	R&S^®HM525 Antenna Active H-Field Measurement Antenna	100 Hz - 30 MHz		X
	R&S^®HZ-12 Precision Halfwave Dipole Set Maximum precision for antenna calibration, field strength measurements, and test site attenuation measurements	30 MHz - 300 MHz	X
	R&S^®HZ-13 Precision Halfwave Dipole Set Maximum precision for antenna calibration, field strength measurements, and test site attenuation measurements	300 MHz - 1000 MHz	X
	R&S^®AM524 Antenna Low-noise Active Antenna System	100 Hz - 1000 MHz	X
	R&S^®HK116 Antenna Biconical Antenna	20 MHz - 300 MHz	X
	R&S^®HF907 Antenna Double-Ridged Waveguide Horn Antenna	800 MHz - 18 GHz	X
	R&S^®HL562 Antenna ULTRALOG	30 MHz - 3 GHz	X
	R&S^®HZ-9 Power Supply Unit for Active Antennas HFH2-Z1/-Z2/-Z6		X	X
	R&S^®HE202 Antenna Active Receiving Dipole	200 MHz - 1000 MHz	X
	R&S^®HE302 Antenna Active Receiving Dipole	20 MHz - 500 MHz	X
	R&S^®HE300 Active Directional Antenna Portable directional antenna for tracing signal transmitters and interference sources	20 MHz - 7.5 GHz	X
	R&S^®HZ-3 Supply Cable, 3 m for Active Antennas HFH2-Z1/-Z2/-Z6 and Test Receiver		X	X
	R&S^®HZ-4 Supply Cable, 10 m for Active Antennas HFH2-Z1/-Z2/-Z6 and Test Receiver		X	X
	R&S^®HFU2-Z4 RF Connecting Cable, 12m N-type, common mode suppression		X
	R&S^®HFU2-Z5 RF Connecting Cable, 7m N-type, common mode suppression		X
	R&S^®EZ-19 RF Adapter Cable, 0.2 m Coax-type, BNC/Twinax connectors, for HZ-10			X		X
Tripods and Positioning Devices
		Frequency	Use E	Use H	Use V	Use I	Use P
	R&S^®HFU-Z Tripod			X
	R&S^®HZ-1 Wooden Tripod for Test Antennas HFH2-Z6, HK116, HL223 and HUF-Z4		X
Additional Accessories
		Frequency	Use E	Use H	Use V	Use I	Use P
	R&S^®FSE-Z4 DC Block 10 kHz to 18 GHz	10 kHz - 18 GHz	X	X	X	X	X
	R&S^®RAM Matching Pad, 50 Ω/75 Ω bidirectional, 0 Hz to 2.7 GHz, N female/N male connectors, load capacity 2 W	0 Hz - 2.7 GHz	X	X	X	X	X
	R&S^®RAZ Matching Pad, 50 Ω/75 Ω bidirectional, 0 Hz to 2.7 GHz, N female/N male connectors, load capacity 2 W	0 Hz - 2.7 GHz	X	X	X	X	X
	R&S^®PSA-Z2 Standard keyboard Keyboards for FSEx, ESIBx (german or english)
	R&S^®RBU50 High-Power Attenuator, 50 W 0 Hz to 2 GHz	0 Hz - 2 GHz	X	X	X	X	X
	R&S^®RBU100 High-Power Attenuator, 100 W 0 Hz to 2 GHz	0 Hz - 2 GHz	X	X	X	X	X
	R&S^®RDL50 High-Power Attenuator, 50 W 0 Hz to 6 GHz, 20 dB	0 Hz - 6 GHz	X	X	X	X	X
	R&S^®ZZA-478 19" adapter 4 HU, 7/8, for BW 2000 cabinets
	R&S^®ZZA-411 19" Rack Adapter 4 HU, 1/1, for BW2000 cabinets
	R&S^®ZZA-95 19" adapter, 5 HU, 1/1, for KB 90 cabinets (R&S ESIB)
	R&S^®PCK IEC/IEEE-Bus Cables, 1m or 2 m The cables are highly screened for low radiated interference.

EMC & Field Strength Test Solutions

Shops

Locations

Partner

Related Links

Downloads

Contact

Newsletter

Products