Ordering Information
For image frequency suppression in the frequency ranges above 3.6 GHz either Option R&S®FSMR-B2 (R&S®FSMR50 and R&S®FSMR26) or R&S®FSMR-B223 (R&S®FSMR26) is required. See Specifications.
Designation Type Order No.
Product Family
Picture Measuring Receiver
All-in-one calibration of signal generators and attenuators
R&S®FSMR
Models
Measuring Receiver 20 Hz to 3.6 GHz R&S®FSMR3 1313.9200.03
Measuring Receiver 20 Hz to 26.5 GHz R&S®FSMR26 1313.9200.26
Measuring Receiver 20 Hz to 43 GHz R&S®FSMR43 1313.9200.43
Measuring Receiver 20 Hz to 50 GHz R&S®FSMR50 1313.9200.50
Hardware Options
YIG Preselection, 3.6 GHz to 26.5 GHz
not with R&S®FSMR-B23 and R&S®FSMR-B223, for R&S®FSMR26
R&S®FSMR-B2 1157.1903.26
YIG Preselection 3.6 GHz to 26 GHz
not with R&S®FSMR-B23 and R&S®FSMR-B223, for R&S®FSMR26
R&S®FSMR-B2 1157.1903.43
YIG Preselection with 20 dB Preamplifier, 3.6 GHz to 26.5 GHz
not with R&S®FSMR-B23 and R&S®FSMR-B2, for R&S®FSMR26
R&S®FSMR-B223 1157.1955.26
YIG Preselection 3.6 GHz to 50 GHz for FSMR 50
for R&S®FSMR50 only
R&S®FSMR-B2 1157.1903.50
OCXO, low aging/improved phase noise at 10 Hz carrier offset R&S®FSU-B4 1144.9000.02
Tracking generator 100 kHz to 3.6 GHz R&S®FSU-B9 1142.8994.02
Output Attenuator, 0 dB to 70 dB
requires R&S®FSU-B9
R&S®FSU-B12 1142.9349.02
Removable Hard Disk R&S®FSMR-B18 1303.0400.14
Second Hard Disk for FSMR-B18
requires R&S®FSMR-B18
R&S®FSMR-B19 1303.0600.04
RF Preamplifier 3.6 GHz to 26 GHz for R&S FSMR 26
requires R&S®FSU-B25, not with R&S®FSMR-B2 and R&S®FSMR-B223, for R&S®FSMR26 only
R&S®FSMR-B23 1157.0907.05
Vector signal analysis for FSMR
28 MHz demodulation bandwidth, demodulation hardware included
R&S®FSMR-B73 1169.5696.02
30 dB Preamplifier, 100 kHz to 50 GHz
only for R&S®FSU26, R&S®FSU43, R&S®FSU46, R&S®FSU50, R&S®FSQ26, R&S®FSQ40, R&S®FSMR26 and R&S®FSMR50
not with R&S®FSQ-B25
R&S®FSU-B24 1157.2100.50
Electronic Attenuator, 0 dB to 30 dB, and 20 dB Preamplifier (3.6 GHz)
not with R&S®FSQ-B24
R&S®FSU-B25 1144.9298.02
Attenuation Calibration Kit R&S®FSMR-Z2 1169.4954.02
N-type Adapter for R&S®RT-Zxx Probes R&S®RT-ZA9 1417.0909.02
Software Options
VOR/ILS Measurement Demodulator
for R&S®FSMR/R&S®FSU/R&S®FSQ - Analysis for VOR and ILS signals
R&S®FS-K15 1302.0936.02
Application Firmware for Noise Figure and Gain Measurements for R&S®FSP, R&S®FSU and R&S®FSQ (preamplifier recommended, e.g. R&S®FSU-B25)
Outperforming any conventional noise measurement system
R&S®FS-K30 1300.6508.02
Application Firmware for Phase Noise Measurement R&S®FS-K40 1161.8138.02
GSM/EDGE Application Firmware R&S®FS-K5 1141.1496.02
3GPP BTS/Node B FDD Application Firmware
3GPP transmitter measurements with R&S®FSQ signal analyzers and R&S®FSU, R&S®FSG, R&S®FSUP, R&S®FSMR, R&S®FMU and R&S®FSP spectrum analyzers
R&S®FS-K72 1154.7000.02
3GPP UE FDD Application Firmware
3GPP transmitter measurements with R&S®FSQ signal analyzers and R&S®FSU, R&S®FSG, R&S®FSUP, R&S®FSMR, R&S®FMU and R&S®FSP spectrum analyzers
R&S®FS-K73 1154.7252.02
3GPP HSDPA BTS Application Firmware (requires R&S®FS-K72
3GPP transmitter measurements with R&S®FSQ signal analyzers and R&S®FSU, R&S®FSG, R&S®FSUP, R&S®FSMR, R&S®FMU and R&S®FSP spectrum analyzers.
Requires R&S®FS-K72
R&S®FS-K74 1300.7156.02
3GPP TD-SCDMA BTS Application Firmware
Base station and mobile station tests on TD-SCDMA with the R&S®FSQ, R&S®FSU and R&S®FSP
R&S®FS-K76 1300.7291.02
3GPP TD-SCDMA UE Application Firmware
Base station and mobile station tests on TD-SCDMA with the R&S®FSQ, R&S®FSU and R&S®FSP
R&S®FS-K77 1300.8100.02
CDMA2000® / IS-95 (cdmaOne) / 1xEV-DV BTS R&S®FS-K82 1157.2316.02
CDMA2000®/1xEV-DV MS Application Firmware R&S®FS-K83 1157.2416.02
CDMA2000®/1xEV-DO BTS Application Firmware
Transmitter measurement on 3GPP2 signals with Signal Analyzer R&S®FSQ and Spectrum Analyzers R&S®FSU and R&S®FSP
R&S®FS-K84 1157.2851.02
CDMA2000®/1xEV-DO MS Application Firmware
Transmitter measurement on 3GPP2 signals with Signal Analyzer R&S®FSQ and Spectrum Analyzers R&S®FSU and R&S®FSP
R&S®FS-K85 1300.6689.02