R&S®ZVA24 Vector Network Analyzer
2 ports, 24 GHz
Frequency range: 10 MHz to 24 GHz
Test ports: 3.5 mm (m)
Accessories
Note: The list below includes typical accessories. For the complete range of accessories, go to the
Typical Accessories
| Designation | Type | Order No. | |
|---|---|---|---|
| Base Unit | |||
 |
Vector Network Analyzer 2 ports, 24 GHz Frequency range: 10 MHz to 24 GHz Test ports: 3.5 mm (m) |
|
1145.1110.24 |
| Calibration Accessories - Manual Calibration Kits and Components | |||
|
Waveguide Calibration Kit WR02 (without sliding match) 325 GHz to 500 GHz |
|
1314.5550.10 | |
|
Waveguide Calibration Kit WR03 (with or without sliding match) 220 GHz to 325 GHz |
|
1307.7300.30 / 1307.7300.31 (with sliding match) | |
 |
Waveguide Calibration Kit WR10 (with or without sliding match) 75 GHz to 110 GHz |
|
1307.7100.10 / 1307.7100.11 (with sliding match) |
|
Waveguide Calibration Kit WR15 (with or without sliding match) 50 GHz to 75 GHz |
|
1307.7500.30 / 1307.7500.31 (with sliding match) | |
| Extension Unit | |||
 |
Extension Unit 10 MHz to 24 GHz (requires |
|
1311.2509.02 |
|
Monitor Output Port 2 500 MHz to 24 GHz (requires |
|
1311.2521.02 | |
|
Combiner 10 MHz to 24 GHz (requires |
|
1311.2538.02 | |
|
Harmonic Filter Generator Port 1 1 GHz to 23 GHz (requires |
|
1311.2544.02 | |
|
Harmonic Filter Receiver Port 2 1 GHz to 23 GHz (requires |
|
1311.2550.02 | |
|
Harmonic Filter Generator Port 3 1 GHz to 23 GHz (requires |
|
1311.2567.02 | |
|
Pulse Modulator Generator Port 1 10 MHz to 24 GHz (requires |
|
1311.2573.02 | |
|
Pulse Modulator Receiver Port 2 10 MHz to 24 GHz (requires |
|
1311.2580.02 | |
|
Pulse Modulator Generator Port 3 10 MHz to 24 GHz (requires |
|
1311.2596.02 | |
|
High Power Coupler Port 1 10 MHz to 24 GHz (requires |
|
1311.2609.02 | |
|
High Power Coupler Port 2 10 MHz to 24 GHz (requires |
|
1311.2615.02 | |
| Internal PC Control Unit, Flash Disks | |||
|
Upgrade FMR7/x to FMR9/6 All |
|
1305.7419.02 | |
|
Upgrade FMR6/5 to FMR9/6 for All |
|
1305.7419.03 | |
| Frequency Extension Accessories | |||
 |
Millimeter-Wave Converters Network analysis up to 500 GHz |
|
|
|
Converter Control Software (for |
|
1307.7022.02 | |
|
Electronic Power Control (required for |
|
1307.6026.02 | |
| Measurement Accessories - Test Cables (high-performance, single Items) | |||
|
3.5 mm (f)/3.5 mm (m), 26.5 GHz 63.5 cm, 1 item |
|
1301.7595.25 | |
|
3.5 mm (f)/3.5 mm (m), 26.5 GHz 96.5 cm, 1 item |
|
1301.7595.38 | |
| Measurement Accessories - Test Cables (Economy, single Items) | |||
|
3.5 mm (f)/3.5 mm (m), 26.5 GHz 61 cm (24''), 1 item |
|
1306.4520.24 | |
|
3.5 mm (f)/3.5 mm (m), 26.5 GHz 91 cm (36''), 1 item |
|
1306.4520.36 | |
|
RF-Cable; 50 Ohm 3.5mm(f) to 3.5mm(m); DC to 26.5 GHz; flexible-phasestable; 1520 mm / 60 inch; 1 piece |
|
1306.4520.60 | |
|
RF-Cable; 50 Ohm 3.5mm(f) to 3.5mm(m); DC to 26.5 GHz; flexible-phasestable; 1520 mm / 60 inch; 1 piece |
|
1306.4520.61 | |
| Calibration Accessories - Manual Calibration Kits and Components | |||
|
Calibration kit, 2.92mm, 0 Hz to 40 GHz Open, Short, Match, Through, m/f each |
|
5011.6559.02 | |
|
Calibration Kit, 0 Hz to 26 GHz, 3.5mm Open, Short, Match, Through, m/f each |
|
5011.6542.02 | |
| Calibration Accessories - Automatic Calibration Units | |||
|
Calibration Unit 10 MHz to 24 GHz, 4 ports, 3.5 mm (f) |
|
1164.0521.30 | |
|
Calibration Unit 300 kHz to 18 GHz, 2 ports, N (f) |
|
1164.0473.72 | |
|
Calibration Unit 300 kHz to 24 GHz, 2 ports, 3.5mm(f) |
|
1164.0473.32 | |
|
Calibration Unit 300 kHz to 3 GHz, 2 ports, N (f) 75 Ohm |
|
1164.0473.75 | |
