R&S®ZVA40 Vector Network Analyzer
2 ports, 40 GHz

Frequency range: 10 MHz to 40 GHz
Test ports: 2.92 mm (m)

Ordering Information
Designation Type Order No.
Base Unit
Picture Vector Network Analyzer
2 ports, 40 GHz
Frequency range: 10 MHz to 40 GHz
Test ports: 2.92 mm (m) 		R&S®ZVA40 1145.1110.40
Direct Channel Access
Direct Generator/Receiver Access for 2-Port ZVA40 R&S®ZVA40-B16 1164.0209.40
Internal Step Attenuators
Generator Step Attenuator, Port 1
70 dB in 10 dB steps, mech., 40 GHz 		R&S®ZVA40-B21 1302.5409.02
Generator Step Attenuator, Port 2
70 dB in 10 dB steps, mech., 40 GHz 		R&S®ZVA40-B22 1302.5415.02
Receiver Step Attenuator, Port 1
35 dB in 5 dB steps, mech., 40 GHz 		R&S®ZVA40-B31 1302.5444.02
Receiver Step Attenuator, Port 2
35 dB in 5 dB steps, mech., 40 GHz 		R&S®ZVA40-B32 1302.5450.02
Other
Oven Quartz (OCXO) R&S®ZVAB-B4 1164.1757.02
Software Options
Time Domain (TDR)
(for R&S®ZVA, R&S®ZVB, R&S®ZVT) 		R&S®ZVAB-K2 1164.1657.02
Noise Figure Measurement
Noise Figure Measurement on linear and frequency converting 2-port devices for R&S®ZVA, R&S®ZVB and R&S®ZVT family
Option R&S®ZVA-K17 (5MHz bandwidth) included 		R&S®ZVAB-K30 1164.1828.02
Frequency Conversion R&S®ZVA-K4 1164.1863.02
Vector Corrected Mixer Measurements
requires R&S®ZVA-B16, R&S®ZVA-K4, R&S®ZVA 4-port unit recommended 		R&S®ZVA-K5 1311.3134.02
Pulsed Measurements R&S®ZVA-K7 1164.1511.02
Embedded LO Mixer Delay Measurements
(requires R&S®ZVA-B16)
(requires R&S®ZVA-K4, R&S®ZVA 4-port unit) 		R&S®ZVA-K9 1311.3128.02
Two internal pulse generators
(for R&S®ZVA and R&S®ZVT) 		R&S®ZVA-K27 1164.1892.02
Pulsed Measurements R&S®ZVA-B7 1164.1492.02 / 1164.1492.03
Set of cables for the R&S®ZVA-K9
to use the internal coupler of R&S®ZVA to generate the two-tone signal
Order No.: 1305.6541.0x
x = 2 for R&S®ZVA8, x = 3 for R&S®ZVA24 and R&S®ZVA40 2.92 mm, x = 4 for R&S®ZVA50 and R&S®ZVA67. 		R&S®ZVA-B9 1305.6541.02 (ZVA8) / 1305.6541.03 (ZVA24,ZVA40) / 1305.6541.04 (ZVA50,ZVA67)
Upgrade of Trigger Hardware
(for R&S®ZVA-K7, R&S®ZVA-B7) 		R&S®ZVA-UK7 1164.1463.02
5 MHz Receiver Bandwidth R&S®ZVA-K17 1164.1070.02
Waveguide Calibration Kit WR02
(without sliding match)
325 GHz to 500 GHz 		R&S®ZV-WR02 1314.5550.10
Calibration Accessories - Manual Calibration Kits and Components
Waveguide Calibration Kit WR03
(with or without sliding match)
220 GHz to 325 GHz 		R&S®ZV-WR03 1307.7300.30 / 1307.7300.31 (with sliding match)
Picture Waveguide Calibration Kit WR10
(with or without sliding match)
75 GHz to 110 GHz 		R&S®ZV-WR10 1307.7100.10 / 1307.7100.11 (with sliding match)
Waveguide Calibration Kit WR15
(with or without sliding match)
50 GHz to 75 GHz 		R&S®ZV-WR15 1307.7500.30 / 1307.7500.31 (with sliding match)
Extension Unit
Picture Extension Unit
10 MHz to 24 GHz
(requires R&S®ZVA-B16) 		R&S®ZVAX24 1311.2509.02
Monitor Output Port 2
500 MHz to 24 GHz
(requires R&S®ZVAX24) 		R&S®ZVAX-B210 1311.2521.02
Combiner
10 MHz to 24 GHz
(requires R&S®ZVAX24) 		R&S®ZVAX-B211 1311.2538.02
Harmonic Filter Generator Port 1
1 GHz to 23 GHz
(requires R&S®ZVAX24) 		R&S®ZVAX-B251 1311.2544.02
Harmonic Filter Receiver Port 2
1 GHz to 23 GHz
(requires R&S®ZVAX24) 		R&S®ZVAX-B252 1311.2550.02
Harmonic Filter Generator Port 3
1 GHz to 23 GHz
(requires R&S®ZVAX24) 		R&S®ZVAX-B253 1311.2567.02
Pulse Modulator Generator Port 1
10 MHz to 24 GHz
(requires R&S®ZVAX24) 		R&S®ZVAX-B271 1311.2573.02
Pulse Modulator Receiver Port 2
10 MHz to 24 GHz
(requires R&S®ZVAX24) 		R&S®ZVAX-B272 1311.2580.02
Pulse Modulator Generator Port 3
10 MHz to 24 GHz
(requires R&S®ZVAX24) 		R&S®ZVAX-B273 1311.2596.02
High Power Coupler Port 1
10 MHz to 24 GHz
(requires R&S®ZVAX24) 		R&S®ZVAX-B291 1311.2609.02
High Power Coupler Port 2
10 MHz to 24 GHz
(requires R&S®ZVAX24) 		R&S®ZVAX-B292 1311.2615.02
Internal PC Control Unit, Flash Disks
Upgrade FMR7/x to FMR9/6
All R&S®ZVA and R&S®ZVT 		R&S®ZVAB-U96 1305.7419.02
Upgrade FMR6/5 to FMR9/6 for R&S®ZVA
All R&S®ZVA, incl. R&S®ZVA67, R&S®ZVA80, R&S®ZVA80-BU, R&S®ZVA110 		R&S®ZVAB-U96 1305.7419.03
Frequency Extension Accessories
Picture Millimeter-Wave Converters
Network analysis up to 500 GHz 		R&S®ZVA-Z
Converter Control Software
(for R&S®ZVA24, R&S®ZVA40, R&S®ZVA50, R&S®ZVA67 and R&S®ZVT20; includes R&S®ZVA-K4) 		R&S®ZVA-K8 1307.7022.02
Electronic Power Control
(required for R&S®ZVA-Z90E, R&S®ZVA-Z110E. For use with R&S®ZVA24, R&S®ZVA40, R&S®ZVA50, R&S®ZVA67) 		R&S®ZVA-B8 1307.6026.02
Measurement Accessories - Test Cables (high-performance, single Items)
2.92 mm (f)/2.92 mm (m), 40 GHz
63.5 cm, 1 item 		R&S®ZV-Z95 1301.7608.25
2.92 mm (f)/2.92 mm (m), 40 GHz
96.5 cm, 1 item 		R&S®ZV-Z95 1301.7608.38
Measurement Accessories - Test Cables (Economy, single Items)
2.92 mm (f)/2.92 mm (m), 40 GHz
61 cm (24''), 1 item 		R&S®ZV-Z195 1306.4536.24
2.92 mm (f)/2.92 mm (m), 40 GHz
91 cm (36''), 1 item 		R&S®ZV-Z195 1306.4536.36
Calibration Accessories - Manual Calibration Kits and Components
Calibration kit, 2.4mm, 0 Hz to 50 GHz
Open, Short, Match, Through, m/f each 		R&S®ZV-Z224 5011.6565.02
Calibration kit, 2.92mm, 0 Hz to 40 GHz
Open, Short, Match, Through, m/f each 		R&S®ZV-Z229 5011.6559.02
Calibration Accessories - Automatic Calibration Units
Calibration Unit
10 MHz to 40 GHz, 2 ports, 2.92 mm (f) 		R&S®ZV-Z54 1164.0467.92