Simple routing of DUT signals to the rear panel using the R&S®CompactTSVP and the R&S®PowerTSVP
The R&S®TS-PTR is an accessory module for transmitting
DUT signals through the system equipment of the
R&S®TSVP family. The module's design as a passive
switching board protects the signal-routing lines that are
connected via the front-panel plug-in connector of an
R&S®TS-PTRF module. When it comes to conducting and
connecting a large number of signal paths through the
instrument and then to the DUT, this standardized signal
transmission module is fundamentally more cost-efficient
than a project-specific cabling solution.
The module is mechanically compatible with the
R&S®TS-PIO3B and is used as a switching and distribution
module in place of an R&S®TS-PIO3B module. In order
to route DUT signals in slots 3 to 14, which are used for
T & M purposes, by means of an R&S®CompactTSVP or
an R&S®PowerTSVP, an additional rear I/O module of the
R&S®TS-PRIO4 is used.
