R&S®FSMR Measuring Receiver

One-box-solution for calibrating signal generators and attenuators

Ordering Information
For image frequency suppression in the frequency ranges above 3.6 GHz either Option FSMR-B2(FSMR50 and FSMR26) or FSMR-B223(FSMR26) is required.See Specifications
Designation Type Order No.
Base Unit
Picture Measuring Receiver
One-box-solution for calibrating signal generators and attenuators 		R&S®FSMR T000.0002.81
Options
GSM/EDGE Application Firmware R&S®FS-K5 1141.1496.02
Bluetooth® Application Firmware R&S®FS-K8 1157.2568.02
VOR/ILS Measurement Demodulator
for R&S®FSMR/R&S®FSU/R&S®FSQ - Analysis for VOR and ILS signals 		R&S®FS-K15 1302.0936.02
Application Firmware for Noise Figure and Gain Measurements for R&S®FSP, R&S®FSU and R&S®FSQ (preamplifier recommended, e.g. R&S®FSU-B25)
Outperforming any conventional noise measurement system 		R&S®FS-K30 1300.6508.02
Application Firmware for phase noise measurements R&S®FS-K40 1161.8138.02
3GPP BTS/Node B FDD Application Firmware
3GPP transmitter measurements with R&S®FSQ signal analyzers and R&S®FSU, R&S®FSG, R&S®FSUP, R&S®FSMR, R&S®FMU and R&S®FSP spectrum analyzers 		R&S®FS-K72 1154.7000.02
3GPP UE FDD Application Firmware (including HSUPA)
3GPP transmitter measurements with R&S®FSQ signal analyzers and R&S®FSU, R&S®FSG, R&S®FSUP, R&S®FSMR, R&S®FMU and R&S®FSP spectrum analyzers 		R&S®FS-K73 1154.7252.02
3GPP HSPA+ UE Application Firmware
3GPP transmitter measurements with R&S®FSQ signal analyzers and R&S®FSU, R&S®FSG and R&S®FSP spectrum analyzers.
Requires R&S®FS-K73 		R&S®FS-K73+ 1309.9274.02
3GPP HSDPA Base Transceiver Station (BTS) Application Firmware
3GPP transmitter measurements with R&S®FSQ signal analyzers and R&S®FSU, R&S®FSG, R&S®FSUP, R&S®FSMR, R&S®FMU and R&S®FSP spectrum analyzers.
Requires R&S®FS-K72 		R&S®FS-K74 1300.7156.02
3GPP TD-SCDMA BTS Application Firmware
Base station and mobile station tests on TD-SCDMA with the R&S®FSQ, R&S®FSU and R&S®FSP 		R&S®FS-K76 1300.7291.02
3GPP TD-SCDMA Mobile Station (MS) Application Firmware
Base station and mobile station tests on TD-SCDMA with the R&S®FSQ, R&S®FSU and R&S®FSP 		R&S®FS-K77 1300.8100.02
CDMA2000® / IS-95 (cdmaOne) / 1xEV-DV BTS Test Application Firmware R&S®FS-K82 1157.2316.02
CDMA2000® /1xEV-DV MS Application Firmware R&S®FS-K83 1157.2416.02
CDMA2000® 1xEV-DO Base Station Test Application Firmware (including Rev A)
Transmitter measurement on 3GPP2 signals with Signal Analyzer R&S®FSQ and Spectrum Analyzers R&S®FSU and R&S®FSP 		R&S®FS-K84 1157.2851.02
CDMA2000® 1xEV-DO Mobile Station Test Application Firmware
Transmitter measurement on 3GPP2 signals with Signal Analyzer R&S®FSQ and Spectrum Analyzers R&S®FSU and R&S®FSP 		R&S®FS-K85 1300.6689.02
Hardware Options
YIG Preselection 3.6 GHz to 26 GHz for FSMR 26
Not for retrofit 		R&S®FSMR-B2 1157.1903.43
YIG Preselection with 20 dB preamplifier, 3.6 GHz to 26 GHz for FSMR 26
Not for retrofit, excludes FSMR-B23 and FSMR-B2 FSU-B25 required 		R&S®FSMR-B223 1157.1955.26
YIG Preselection 3.6 GHz to 50 GHz for FSMR 50
Not for retrofit 		R&S®FSMR-B2 1157.1903.50
Low-Aging OXCO R&S®FSU-B4 1144.9000.02
Tracking generator 100 kHz to 3.6 GHz R&S®FSU-B9 1142.8994.02
Output attenuator, 0 dB to 70 dB, for FSU-B9 R&S®FSU-B12 1142.9349.02
Removable Hard Disk R&S®FSMR-B18 1303.0400.04
Second Hard Disk for FSMR-B18 R&S®FSMR-B19 1303.0600.04
RF Preamplifier 3.6 GHz to 26 GHz for R&S FSMR 26 R&S®FSMR-B23 1157.0907.05
Internal preamplifier 100 kHz to 50 GHz, 30 dB gain, for Spectrum Analyzers FSU26/43/46/50, Signal Analyzers FSQ26/40, Measuring Receivers FSMR26/50 R&S®FSU-B24 1157.2100.50
Electronic Attenuator, 0 dB to 30 dB, and 20 dB Preamplifier (3.6 GHz) R&S®FSU-B25 1144.9298.02
Vector signal analysis for FSMR
28 MHz demodulation bandwidth, demodulation hardware included 		R&S®FSMR-B73 1169.5696.02